Popular searches
- PLA
- PETG
- ASA
- ABS
RAW3D
RAW3D PLA Chameleon 3D Printer Filament 1.75mm 1kg - Rose Quartz
$29.99 AUD
Unit price
Regular price
per
Hurry, only 12 items left in stock!
Pickup available at RAW3D Warehouse
Usually ready in 1 hour
Colour-shifting PLA for eye-catching prints
- Vibrant multicolour effect that changes with viewing angle
- Reinforced PLA formula for reliable, smooth printing
- Strong dimensional stability with minimal warping or cracking
- Easy to print on most mainstream FDM/FFF 3D printers
RAW3D PLA Chameleon makes it simple to create standout, dynamic prints with the ease of regular PLA printing.
Hex Code: #E7CBCB
Key Features
- Enhanced PLA Formula: Reinforced and toughened PLA for dependable print performance.
- Vibrant Multicolour Effect: Infused with colour powders for a striking, multicoloured appearance when viewed from varying angles.
- Excellent Stability: Maintains dimensional accuracy with minimal warping or cracking.
- Easy to Print: Smooth extrusion and consistent results on a variety of 3D printers.
- Freshly sealed for quality: Vacuum-packed with desiccant to protect filament performance.
- Local shipping: Dispatched quickly from our West Australian warehouse.
Practical Applications
- Decorative and display models
- Everyday prints that benefit from a dynamic finish
- Multicolour models without filament swapping
Storage Recommendations
Store RAW3D PLA Chameleon filament in a cool, dry environment at room temperature (up to ~40°C) with humidity below 20%. Keep spools sealed with desiccant when not in use, and dry the filament before printing if exposed to air for extended periods. Avoid heat, dust, and direct sunlight to prevent degradation.
Technical Specifications
- Material: PLA Chameleon
- Filament diameter: 1.75 mm
- Net weight: ~1 kg
- Nozzle temperature: 190–220°C
- Bed temperature: 25-60°C
- Heat resistance (HDT): ~53°C
👉 For full mechanical, thermal, and physical specifications, download the Technical Data Sheet (TDS).
RAW3D PLA Chameleon 3D Printer Filament 1.75mm 1kg - Rose Quartz
$29.99 AUD
Unit price
Regular price
per
RAW3D PLA Chameleon 3D Printer Filament 1.75mm 1kg - Rose Quartz
W
h
y
C
h
o
o
s
e
R
A
W
3
D
P
L
A
C
h
a
m
e
l
e
o
n
?
01
02
03
01
02
03
Recommended Print Settings
Filament Type
P
L
A
C
h
a
m
e
l
e
o
n
Filament Diameter
1
.
7
5
m
m
- Nozzle Temp.
- Print Speed
- Bed Temp.
- Cooling Fan
- Retraction Speed
- Enclosure
- Hardened Nozzle
- 190-220°C
- 60-90mm/s
- 25-60°C
- 50-100%
- 30-50mm/s
- Optional
- Optional
T
e
c
h
n
i
c
a
l
S
p
e
c
i
f
i
c
a
t
i
o
n
s
Everything you need to know at a glance. Browse the key mechanical, physical and thermal properties to help determine if this filament is right for your project.
Product specification
- Filament Weight:
- Filament Diameter:
- Spool Specs:
- Package Weight:
- Drying:
- 1kg
- 1.75mm (±0.02mm)
- AMS Compatible, 150g
- 1.3kg
- ~5 hours @ 50°C
Mechanical Properties
- Tensile Strength:
- Elongation at Break:
- Flexural Modulus:
- Flexural Strength:
- Impact Strength:
- (ISO527) 45-49Mpa
- (ISO527) 13.5-15.5%
- (ISO527) 1000-1100Mpa
- (ISO178) 69-75Mpa
- (ISO180) 4.5-5KJ/m²
Physical Properties
- Density:
- Melf Flow Index (MFR):
- Moisture Absorption (23°C/24h):
- (ISO 1183) 1.25-1.26g/cm³
- (ISO 1133) 4-8g/10min
- (ISO 62) <0.3%
Thermodynamic Properties
- HDT @ 0.455MPa (66psi)
- Continuous Use Temp.
- (ISO75) 53°C
- (IEC 60216) 50°C
Note: The values listed above are typical material properties provided by the manufacturer and are intended as a general reference only. Actual performance may vary depending on printer model, print settings, environmental conditions and part geometry.
Need the full Technical Data Sheet? Download it here.
Frequently Asked
Questions
Is RAW3D PLA Chameleon compatible with my printer?
RAW3D PLA Chameleon prints smoothly on most open-material 1.75mm FFF/FDM 3D printers.
What creates the colour-shifting effect?
The filament is infused with colour powders, causing prints to display different colours when viewed from different angles.
Is PLA Chameleon easy to print?
Yes! It offers smooth extrusion, excellent stability, and prints similarly to standard PLA.
Do I need to dry PLA Chameleon?
You can print straight from the bag. However, if the filament is exposed to humidity, drying at 50°C for at least 5 hours using a filament dryer/food dehydrator is recommended for best results.
R
e
c
e
n
t
l
y
v
i
e
w
e
d
You may also like
No products found