Popular searches
- PLA
- PETG
- ASA
- ABS
RAW3D
RAW3D PLA & PETG Support Material 1.75mm 1kg - Natural
$29.99 AUD
Unit price
Regular price
per
Hurry, only 12 items left in stock!
Pickup available at RAW3D Warehouse
Usually ready in 1 hour
Easier Support Removal, Smoother Surfaces
- Designed for PLA & PETG: Made specifically for supporting these popular materials
- Easier Support Removal: Uses polarity differences to reduce bonding to your model.
- Smoother Contact Surfaces: Minimises damage and helps maintain a cleaner finish
Spend less time removing stubborn support material and more time enjoying the finished print.
Key Features
- PLA & PETG Compatible: Exclusively designed for use with PLA and PETG
- Reduced Material Adhesion: Leverages polarity differences to reduce adhesion between the support and model material.
- Efficient Support Removal: Makes removing support material easier and more efficient.
- Reduced Surface Damage: Helps minimise damage to the model's contact surfaces during support removal.
- Freshly sealed for quality: Vacuum-packed with desiccant to protect filament performance
- Fast Aussie dispatch: Packed and sent directly from our WA warehouse
Practical Applications
- Complex models with challenging overhangs
- Detailed models requiring cleaner support interfaces
- Functional parts where contact surfaces matter
- Display models requiring a smoother finish
Storage Recommendations
Store RAW3D PLA & PETG Support Material in a cool, dry environment at room temperature (up to ~40°C) with humidity below 20%. Keep spools sealed with desiccant when not in use, and dry the filament before printing if exposed to air for extended periods. Avoid heat, dust, and direct sunlight to prevent degradation.
Technical Specifications
- Material: PLA & PETG Support Material
- Filament diameter: 1.75 mm
- Net weight: 1 kg
- Nozzle temperature: 220-240°C
- Bed temperature: 35-50°C
- Printing Speed: 40-300mm/s
👉 Full mechanical, thermal, and physical specifications coming soon.
RAW3D PLA & PETG Support Material 1.75mm 1kg - Natural
$29.99 AUD
Unit price
Regular price
per
RAW3D PLA & PETG Support Material 1.75mm 1kg - Natural
W
h
y
C
h
o
o
s
e
R
A
W
3
D
P
L
A
&
P
E
T
G
S
u
p
p
o
r
t
M
a
t
e
r
i
a
l
?
01
02
03
01
02
03
Recommended Print Settings
Filament Type
P
L
A
&
P
E
T
G
S
u
p
p
o
r
t
Filament Diameter
1
.
7
5
m
m
- Nozzle Temp
- Print Speed
- Bed Temp
- Cooling Fan
- Retraction
- Enclosure
- Hardened Nozzle
- 220-240°C
- 40-300mm/s
- 35-50°C
- -
- -
- Optional
- Optional
Frequently Asked
Questions
Does this support filament dissolve in water?
No, this material does not dissolve in water. Instead, it is specifically designed to reduce adhesion to PLA and PETG, making supports easier to remove after printing.
What printer do I need to use this filament?
A dual-extrusion or multi-nozzle 3D printer is recommended, allowing the support material and PLA/PETG filament to be printed separately.
What print temperature is best for PLA & PETG Support Material?
For best results, we recommend a nozzle temperature of 220–240°C and a bed temperature of 35–50°C. As with any filament, you may need to fine-tune settings depending on your printer and print setup.
What makes it easier to remove?
The support material is specifically designed to have reduced adhesion to PLA and PETG. This helps supports separate more efficiently after printing, making support removal easier and helps protect surface quality.
R
e
c
e
n
t
l
y
v
i
e
w
e
d
You may also like
No products found