Popular searches
- PLA
- PETG
- ASA
- ABS
RAW3D
RAW3D PLA+ Silk Dual Colour Filament 1.75mm 1kg - Yellow/Green
$29.99 AUD
Unit price
Regular price
per
Hurry, only 12 items left in stock!
Pickup available at RAW3D Warehouse
Usually ready in 1 hour
Two Colours. One Filament. A Standout Finish.
- Lustrous silk-like finish
- Two distinct colours in one filament
- Tough and designed to resist brittleness
-
Easy to print with familiar PLA characteristics
Create eye-catching prints with a unique two-colour effect - all from a single spool.
Key Features
- Dual-Colour Design: Two distinct colours incorporated into a single filament cross-section for a unique visual effect.
- Lustrous Silk Finish: Creates a smooth, shiny appearance that catches the light.
- Tough & Less Brittle: Designed to provide a tougher alternative to traditional Silk PLA.
- Easy to Print: Retains the user-friendly printing characteristics of PLA.
- No Colour Changes Required: Create a two-colour visual effect from one continuous filament.
- Freshly sealed for quality: Vacuum-packed with desiccant to protect filament performance.
- Local shipping: Dispatched quickly from our West Australian warehouse.
Practical Applications
- Decorative models and sculptures
- Figurines and character models
- Vases and home décor
- Awards and trophies
Storage Recommendations
Store RAW3D PLA+ Silk Dual Colour filament in a cool, dry environment at room temperature (up to ~40°C) with humidity below 20%. Keep spools sealed with desiccant when not in use, and dry the filament before printing if exposed to air for extended periods. Avoid heat, dust, and direct sunlight to prevent degradation.
Technical Specifications
- Material: PLA+ Silk
- Filament diameter: 1.75 mm
- Net weight: ~1 kg
- Nozzle temperature: 200–220°C
- Print Speed: 40-300mm/s
- Bed temperature: 25-60°C
👉 For full mechanical, thermal, and physical specifications, refer to the Technical Data Sheet.
RAW3D PLA+ Silk Dual Colour Filament 1.75mm 1kg - Yellow/Green
$29.99 AUD
Unit price
Regular price
per
RAW3D PLA+ Silk Dual Colour Filament 1.75mm 1kg - Yellow/Green
W
h
y
C
h
o
o
s
e
R
A
W
3
D
P
L
A
+
S
i
l
k
D
u
a
l
C
o
l
o
u
r
?
01
02
03
01
02
03
Recommended Print Settings
Filament Type
P
L
A
+
S
i
l
k
D
u
a
l
C
o
l
o
u
r
Filament Diameter
1
.
7
5
m
m
- Nozzle Temp.
- Print Speed
- Bed Temp.
- Cooling Fan
- Enclosure
- Hardened Nozzle
- 200-220°C
- 40-300mm/s
- 25-60°C
- 50-100%
- Optional
- Optional
T
e
c
h
n
i
c
a
l
S
p
e
c
i
f
i
c
a
t
i
o
n
s
Everything you need to know at a glance. Browse the key mechanical, physical and thermal properties to help determine if this filament is right for your project.
Product Specs
- Filament Weight:
- Filament Diameter:
- Spool Specs:
- Package Weight:
- Drying:
- 1kg
- 1.75mm (±0.02mm)
- 150g, AMS Compatible
- 1.3kg
- ~5 hours @ 50°C
Mechanical Properties
- Tensile Strength:
- Elongation at Break:
- Flexural Modulus:
- Flexural Strength:
- Impact Strength:
- (ISO527) 45-49Mpa
- (ISO527) 5-6.5%
- (ISO527) 730-760Mpa
- (ISO178) 89-93Mpa
- (ISO180) 4.5-5KJ/m²
Physical Properties
- Density:
- Melf Flow Rate (190°C, 2.16kg):
- Moisture Absorption (23°C/24h):
- (ISO 1183) 1.25-1.26g/cm³
- (ISO 1133) 6-12g/10min
- (ISO 62) <0.3%
Thermodynamic Properties
- HDT @ 0.455MPa (66psi)
- Continuous Use Temp.
- (ISO75) 53°C
- (IEC 60216) 50°C
Note: The values listed above are typical material properties provided by the manufacturer and are intended as a general reference only. Actual performance may vary depending on printer model, print settings, environmental conditions and part geometry.
Need the full Technical Data Sheet? Download it here.
Frequently Asked
Questions
What makes PLA+ Silk different from the original Silk PLA?
PLA+ Silk is the second generation of Silk PLA, with enhanced toughness added to the formulation. It retains the shiny, silk-like appearance while offering an upgrade in toughness over the original version.
Is PLA+ Silk Dual Colour easy to print?
Yes! PLA+ Silk Dual Colour is designed to retain the easy-printing characteristics of standard PLA. It is suitable for a wide range of mainstream FFF/FDM 3D printers.
What is PLA+ Silk Dual Colour best used for?
Its distinctive finish makes it particularly suited to decorative and display-focused prints such as figurines, sculptures, vases, ornaments and awards where you want something visually unique.
Does PLA+ Silk Dual Colour have a glossy finish?
Yes! PLA+ Silk Dual Colour is designed to produce a shiny, lustrous surface with a distinctive silk-like appearance, giving finished prints a more premium look than standard PLA - no post processing required!
R
e
c
e
n
t
l
y
v
i
e
w
e
d
You may also like
No products found